Author Topic: tmpunrar (ramdisk) keeps filling up  (Read 7062 times)

Offline BeZazz

  • Prolific Indexer
  • ****
  • Posts: 256
  • Helpful: +9/-2
    • BeZazz
tmpunrar (ramdisk) keeps filling up
« on: 2013-06-19, 10:59:22 am »
My tmpunrar keeps filling up.

I have used both of the following
Quote
tmpfs /var/www/nZEDb/nzbfiles/tmpunrar tmpfs user,uid=1000,gid=33,nodev,nodiratime,nosuid,size=512M,mode=777 0 0
and
tmpfs /var/www/nZEDb/nzbfiles/tmpunrar   tmpfs  nodev,nodiratime,noexec,nosuid,size=256M 0 0

with the same issue.
Would appreciate if someone could at least point me in the right direction to start looking on the cause.

Offline jonnyboy

  • Epic Indexer
  • *****
  • Posts: 1046
  • Helpful: +93/-1
  • Lazzy Trucker
Re: tmpunrar (ramdisk) keeps filling up
« Reply #1 on: 2013-06-19, 12:23:57 pm »
Default timeout is 300 seconds, increase the timeout to at least 600.

Offline BeZazz

  • Prolific Indexer
  • ****
  • Posts: 256
  • Helpful: +9/-2
    • BeZazz
Re: tmpunrar (ramdisk) keeps filling up
« Reply #2 on: 2013-06-19, 12:43:14 pm »
Did you mean "Postprocess Kill Timer:"?
If so I have that set to 900. Should I increase that?

Offline jonnyboy

  • Epic Indexer
  • *****
  • Posts: 1046
  • Helpful: +93/-1
  • Lazzy Trucker
Re: tmpunrar (ramdisk) keeps filling up
« Reply #3 on: 2013-06-19, 12:57:32 pm »
There are 2 reasons it can fill up. "Maximum add PP parts downloaded:" more than 10 or the kill timer killing th e pane and leaving scrap behind.

Offline BeZazz

  • Prolific Indexer
  • ****
  • Posts: 256
  • Helpful: +9/-2
    • BeZazz
Re: tmpunrar (ramdisk) keeps filling up
« Reply #4 on: 2013-06-19, 01:16:31 pm »
Ok.
Thanks for the replies.

Offline Killerc

  • Junior Indexer
  • **
  • Posts: 45
  • Helpful: +2/-0
  • deathadder on IRC
Re: tmpunrar (ramdisk) keeps filling up
« Reply #5 on: 2013-06-19, 02:58:29 pm »
I had the above set to 600 secs and max add has been at 2 since i started. I still had the issue. PP pane was saying pane dead after 30 or so seconds sometimes aswell so its not like it was running something (i assume?). However updating on git cured it, i had this happen once before aswell, same settings as above at first i thought it was big releases thing so set that, killed alot of the over 100gb releases from my site, mostly crap anyway. Didn't fix either, clearing it myself did and couple of days later then aswell updating from git cured it.

Offline jonnyboy

  • Epic Indexer
  • *****
  • Posts: 1046
  • Helpful: +93/-1
  • Lazzy Trucker
Re: tmpunrar (ramdisk) keeps filling up
« Reply #6 on: 2013-06-19, 03:34:53 pm »
There is another script that also kills that pane, optimize/update, running. Those also kill the script and leave scrap behind.
I will update the script to remove scrap when it starts.

Also, grab nzbs dumps them in there temporarily while it imports, if it fails, it may be left behind. I will check that also.
« Last Edit: 2013-06-19, 03:36:33 pm by jonnyboy »

Offline BeZazz

  • Prolific Indexer
  • ****
  • Posts: 256
  • Helpful: +9/-2
    • BeZazz
Re: tmpunrar (ramdisk) keeps filling up
« Reply #7 on: 2013-06-23, 11:07:26 pm »
I changed
Maximum add PP parts downloaded:
from 4 to 2
and
Postprocess Kill Timer: from 600 to 1400

and the issue appears to have gone for me.